Thanks Damian, I have started a "SUPPORT" page at the top where I'm going to post some Questions and Answers. I hope that it will make things a little easier.
This welder will work with a 1 Farad Capacitor. It will not be necessary though because this welder can weld very small and fine things. The voltage can go down to 0.1V with a pulse of 0.1Ms.
Fritz, can you post items to Sydney Australia if i pay extra postage
ReplyDeleteGreat job on the manual Fritz.
ReplyDeleteThanks Damian, I have started a "SUPPORT" page at the top where I'm going to post some Questions and Answers. I hope that it will make things a little easier.
ReplyDeleteHi Fritz,what is the lowest possible voltage setting with the welder?I would like to weld very fine wire.What about smaller capacitor?Thanks.
ReplyDeleteThis welder will work with a 1 Farad Capacitor. It will not be necessary though because this welder can weld very small and fine things. The voltage can go down to 0.1V with a pulse of 0.1Ms.
ReplyDelete